Experimental Study of Misalignment Effect on Vibration of Helical Gears
الملخص
A helical gear pair can transmit power with low-level vibration and noise as compared with a spur gear. Many studies have been performed on the vibration and noise problem of the spur gear pair, but there are few studies on the helical gear pair, especially one with a narrow facewidth. This paper presents an experimental study on the relation between the vibration and parallelism of axes for three kinds of helical gear pairs. Results obtained have made clear that the deviation exerts an influence on the characteristics of gear vibration more strongly than the inclination, and that the deviation, as well as the inclination, which leads to the leading side bearing, exerts an influence on those more strongly than which leads to the trailing side bearing.
التنزيلات
المراجع
Alattas, M., (1994). Maintenance des machines tournantes: signature de defauts
d'engrenage droits et helicoidaux, Ph D thesis, I.N.S.A – Lyon- France.
Alattas, M., J. Mahfoudh, D.Remond and D. Play, (1994). Experimental study of faults
influence on vibration and noise measurements in gear transmission mechanism,
Gearing International Conference, Newcastle.
Droskack, M. J. and D. R. Houser, (977). An experimental and theoretical study of the
effect of simulated pitch line pitting on the vibration of a geared system, ASME 77-
DET 123.
Özguven, N. and Houser, D. R., (1988). Mathematical models used in gear dynamics - a
review, Journal of Sound and Vibration, Vol .3, No. 121.
Peng, Z., and N. Kerssissogolou, (2003). An integrated approach to fault diagnosis of
machinery using wear debris and vibration analysis, Wear, vol. 255.
Randall,R. B., (1982). A New method of modeling gear faults, ASME, J. Mechanical
Design, No. 104.
Stewart, R. M., (1980). The specification and development of a standard for gearbox
monitoring, Proc. Instr. Mech. Eng.
Umezawa, K., (1974). The meshing test on helical gears under load transmission, Bull.
JSME, vol. 17, no. 112.
Umezawa, K., and T. Suzuki, (1986). Vibration of power transmission helical gears
(approximate equation of tooth stiffness), Bulletin of JSME, Vol. 29, No. 251.
VanDyck, A., and G. Cotterill, (2005). Improved machine condition monitoring,
Maintenance Journal, Vol. 18, No. 2, Australia.
Walsh, C. T., (1992). Condition monitoring of machine systems for the 1990s and
Beyond, J. Machine vibration, vol. 1.
التنزيلات
منشور
إصدار
القسم
الرخصة
الحقوق الفكرية (c) 2026 Moh'd Aqeel Alattas (Author)
هذا العمل مرخص بموجب Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
